01 / Device Technology
4 in 1
Welding, ablation, cutting and weld cleaning in one integrated laser system.
02 / Material specialization
Stainless steel / Aluminum / Galvanized
Full control of the weld pool without burn-through and deformation of thin sheets.
03 / Process purity
0% abrasive and chemicals
Light beam cleaning without destroying the detail geometry and zinc layer.
04 / Operational range
No limits
B2B cooperation and own transport to and from the plant in Szczuczyn (S61).
Applications in production and cooperation
Select the process and check the parameters of the 4-in-1 laser
We focus the beam's energy precisely on the work area. This allows us to bond and clean components requiring high aesthetics and dimensional repeatability.
Click on the selected technology to display the processing regime:
Stainless steel (acid-resistant) and aluminum alloys from 0.5 mm
Narrow heat-affected zone (HAZ) and smooth weld without the need for grinding
REGIME: LASER WELDING (STAINLESS STEEL / ALUMINUM)
The concentrated beam of the 4-in-1 MOST laser allows for joining thin sheets and profiles made of stainless steel and aluminum 3-4 times faster than traditional TIG welding. Minimal heat input eliminates wavering and structural distortion, while the even weld minimizes finishing.
Thickness range: 0.5 – 4.5 mm (full penetration)
Wire feeder: Automatic (0.8 – 1.6 mm wire)
Post-weld treatment: No grinding / laser cleaning
Profitability analysis for B2B production
AREA OF OPERATIONS
TRADITIONAL METHOD
LASER 4in1 in HUSSEG
Combining stainless steel and aluminum
TIG / MIG welding + grinding:
A large amount of heat input, waving of thin sheets, the need for straightening and many hours of stripping and polishing of welds.
4-in-1 laser welding:
3–4× faster seam welding speed, minimal thermal distortion and a smooth weld ready for collection or immediate cleaning.
Welding of galvanized steel
Traditional arc welding:
Extensive burnout of the zinc coating around the weld, numerous spallings requiring hammering and the risk of joint porosity.
Controlled beam energy:
Limited zinc evaporation zone to a narrow strip, no spattering and full compatibility with DUPLEX powder coatings.
Cleaning joints and surfaces
Subcontracting logistics
Sandblasting / Acid Etching:
Risk of deformation of thin parts under the impact of abrasive, the need to mask threads or toxic pickling pastes and wastewater.
Distributed cooperation:
Transporting parts separately to the welding shop, separately to the shot-blasting shop and separately to the powder coating shop (additional freight and delay costs).
MOST laser cleaning:
Contactless removal of welding discoloration, rust and white corrosion without material loss, dust and the need to wash the part.
Comprehensive process at HUSSEG:
4-in-1 MOST laser welding/cleaning and powder coating in a 6.0 m oven under one roof in Szczuczyn + own transport up to 200 km.
COOPERATIVE SPECIFICATION
Frequently asked questions from purchasing departments and technologists
What materials and thickness ranges do you weld with the 4-in-1 laser?
We weld stainless steel (acid-resistant), aluminum, carbon steel, and galvanized steel in series and prototypes. Laser technology is particularly effective on thin sheets and profiles (from as little as 0.5 mm to approximately 4–5 mm with full penetration), where traditional TIG/MIG welding causes wavering and thermal deformation of the material. If necessary, we use an automatic welding wire feeder.
Does the component require grinding and etching of the welds after laser welding?
Grinding is not required for most projects – the laser weld is narrow, smooth, and even, reducing finishing time by 70–80%. Additionally, the 4-in-1 head's cleaning function allows for immediate removal of thermal discoloration after welding stainless steel – without the use of corrosive acids or pickling pastes.
What is the difference between laser cleaning and sandblasting and glass blasting?
Laser ablation operates without contact and abrasives. The laser beam vaporizes only rust, oxides, scale, paint, or process lubricants, without damaging the geometry of the part or the zinc layer (in the case of galvanized sheets and structures). The absence of abrasives also means no dust inside closed profiles and no risk of deformation of thin sheets.
Can we perform a welding or cleaning test on our part before ordering a series?
Yes. Before launching mass production, we conduct a free technological trial at our facility in Szczuczyn. You can bring a sample element or send it by courier – we will select the beam parameters, perform the weld or ablation, and send the finished part back to your quality control department for approval.
Do you combine laser processing with powder coating in one order?
Yes – this is the greatest logistical savings for our customers. After welding or laser cleaning at the 4-in-1 MOST station, parts are sent directly to our powder coating facility (6000 x 2400 x 2000 mm oven, DUPLEX C3–C5 system), and the finished product is delivered using our own transport within a 200 km radius of Szczuczyn.
LET'S TALK ABOUT YOUR PROJECT
CONTACT THE PRESIDENT OF THE MANAGEMENT BOARD OR THE PRODUCTION DEPARTMENT DIRECTLY:
Damian Danowski – President of the Management Board
+48 605-429-087
Hala Produkcyjna & Biuro:
ul. Henryka Sienkiewicza 5E,
19-230 Szczuczyn (trasa S61)